The Unofficial Behringer Forums

pmaillot wrote: ↑Thu Apr 18, 2024 1:51 pm otherwise things can get complicated quickly

Agreed. But X32/M32/Wing routing can be just as intimidating to some. And now with the new S16/DL16 firmware update, it could be come chaotic quickly.

Just curious of the purpose and advantage if any by using a Dante Card. Dante is typically used to enable multiple brand of consoles and interfaces to access common inputs and outputs. For example, if you have a Yamaha console at FOH, a Wing at monitor, an A&H at broadcast and a computer for re...

Hi Bobatasp , welcome to our forum. Yes indeed, you can have one console as master sync and another with HA gain control. Those are independent of each other. The HA control rule is that the console closest to the preamps (both local and any stageboxes connected to it) have, by default, HA control, ...

mattclarkmixer wrote: ↑Fri Apr 12, 2024 3:51 am Saved me a bunch of time and I’m sure I will be using it a lot in the future.

Great to hear, Matt. I also use that tool a lot.

Definition of an expert (or xspirt)
X is used in math for the unknown
A spirt is a drip under pressure
So an expert is an unknown drip under pressure

I have set the routing on Aux 7/8 to be the Main PA mix and I can hear that, but when I solo a channel I still only hear the whole Main PA mix. Welcome to our forum. Unfortunately the Wing uses Aux 7/8 for the headphone output and can't be changed. Assign your Main PA matrix to something other than...

I firmly believe the S16 has a failure inside it It sure sounds like that is the case, unfortunately. Also unfortunately, Music-Tribe only provides service manuals to authorized service providers and guard them with an iron fist. Failing that, I'm trying to purchase another unit so I can do a signa...

Just to add to the discussion, Dave Rat just posted a video of him testing cat5e and cat6 cables for AES50 applications using the Fluke DSX5000 tester.
Here is the link

Hi ddamron , welcome to our forum. The loud pops and audio dropout is due to ESD (electrostatic discharge) when the AES50 cable is not shielded ethernet cable, does not have ethercon ends on each end, there is no continuity between ethercon ends, and the cable length does not exceed the manufacture'...

mattclarkmixer wrote: ↑Sat Apr 06, 2024 5:51 am all their channel settings would come along for the ride. We’re saying the same thing, correct?

Correct