The Unofficial Behringer Forums

I get signal from all 32 channels.

Thanks, I'll check that out.

Hi. Just bought an MPC Live 2 and plugged the USB from the X32 Rack into the sockets on the Live 2 and I set the X32 card to 32 ins/outs and then made the settings in the MPC to receive the 32 channels. I routed the ins from the X32 to the outs on the card so I could record any input channel on the ...

Hi there. I'd like to know if it is possible to do the following with the X32 Rack. I want to send hardware outputs 1-4 to an fx unit via mix bus 1-4. I'd like to set up mix bus 5+6 as sends to the USB card so it receives them on its channels 1+2 but the card seems to want its hardware outputs 1+2 t...

I see, thanks.

Hi there. I'm assuming that if I select 'scribble strip' in the mixer safes section then the scribble strip will remain unaltered regardless of scene recall. Experimentation has confirmed this, I can scroll through scenes 1-19 with or without the strip changing but scene 0 will change regardless of ...

pmaillot wrote: ↑Sun Jul 09, 2023 4:06 pm Channel 1 sending to bus 1 with level n is:

/ch/01/mix/01/level n [-90.0...+10.0 for MIDI or 0.0..1.0 for OSC]

Perhaps also make sure it is not mute:

/ch/01/mix/01/on ON [OFF/ON for MIDI or 0/1 for OSC]


See p. 26 of the OSC doc.

Just got it sorted, thank you.

pvannatto wrote: ↑Sun Jul 09, 2023 4:02 pm The OSC command should be (page 26)
/ch/01/mix/01/level -5
or in hex
F0 00 20 32 32 2F 63 68 2F 30 31 2F 6D 69 78 2F 30 31 2F 6C 65 76 65 6C 20 2D 35 F7

Brilliant, thanks!

Hi there. I'd like to send for example, channel 1 to bus send 1 so I chose '/bus/01/mix/1/level -5' which converted to 2f6275732f30312f6d69782f312f6c6576656c202d35 from this page: https://i.postimg.cc/Wt7nwJQg/Screenshot-from-2023-07-09-16-29-35.png but I couldn't get it to work. I was expecting som...

pmaillot wrote: ↑Sun Jul 09, 2023 9:32 am You may want to try with using REC rather than RECORD

Hah! Brilliant, thanks.