M32 Firmware version log

M32 and X32 Digital Consoles
Post Reply
DwayneA
Posts: 55
Joined: Thu Apr 15, 2021 11:00 pm

M32 Firmware version log

Post by DwayneA »

I've seen it in the past, but cannot find it now.
Anyone has a link it will be appreciated.
Thx. D
User avatar
pvannatto
Posts: 1330
Joined: Wed Apr 14, 2021 3:48 pm
Location: Ontario, Canada

Re: M32 Firmware version log

Post by pvannatto »

The firmware version log is part of the firmware release (called Release History.txt). I've attach the one from 4.06 update.
Attachments
Release_History_4.txt
(9.04 KiB) Downloaded 832 times
Paul Vannatto
Global Moderator
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: M32 Firmware version log

Post by GaryH »

I have them somewhere...will look. I at one point put them all in a file
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: M32 Firmware version log

Post by GaryH »

Found part, I do have the rest, but can’t locate them at the moment, will look tomorrow. Some of this could be pre M32 but in general the firmware is identical for both. Interesting to see some of the early stuff anyway!

X32 firmware 2.0-2.16


2.16 (2016-02-02)
improvements:
- fixed DIN midi remote control problem introduced in 2.15

2.15 (2015-11-06)
improvements:
- channel group assignments synced when fader link option is reselected
- eq gain center led only lights up when gain is exactly 0 dB
- hard mute state shown on meter pages (dark red fader knob)
- eq band reset bug fixed
- screen draw routines significantly accelerated
- ducker attack and release times fixed (were swapped since 2.10)

2.14 (2015-07-16)
improvements:
- X-USB and DN32-USB were reporting wrong sample rate after changing sample rate without reboot

2.13 (2015-07-06)
improvements:
- fixed an issue where iQ speaker settings were not recalled correctly when linked
- iQ setup now also accessible via layer buttons
- fixed an issue where inserts were not activated when usb was very busy during startup
- correct preamp indication on DL152..DL155, output SRC disabled on DL155
- fixed an issue where midi messages were duplicated when assigned to more than one assignable
button/encoder simultaneously

2.12 (2015-06-01)
improvements:
- HUI level meters and LCD fixed
- DHCP menu on X32CORE fixed
- fixed rare issue where aes50 slave mode won't sync
- iQ speaker settings moved to /outputs/p16 path
new features:
- iQ speaker link function

2.11 (2015-04-09)
improvements:
- load show file in X32CORE fixed (snippet offset)
- fader motor issues on M32/M32R (minimum position) fixed
- exclude hidden and system files from usb file list
- correct indication of 0 dB fader position
- scene GO and UNDO leds fixed
- DHCP can be selected on X32CORE
- bus AFL solo correctly uses pan when bus is routed to LR
new features:
- support for M32C, S32, DL32, DL231

2.10 (2014-11-20)
improvements:
- screen flicker when switching between pages with overlay graphics removed
- improved clock stability in Dante slave mode
new features:
- rta detector selection (rms/peak), peak hold, and adjustable decay time
- gate section: expander with adjustable range
- compressor section: compressor/expander with auto mode

2.09 (2014-10-23)
improvements:
- fixed issue where usb drives were not recognized when connected during power-on
- setup/global and setup/config screens rearranged
- sample rate can now be changed without reboot
- issue with mute menu on scenes/home screen fixed
- some redraw issues related to mute menu fixed
new features:
- safe shutdown (incl. usb recorder shutdown), console reboot, firmware update, factory reset added to setup
- selectable 12h (am/pm) and 24h clock mode
- new options: hard mute groups, dcas as mute groups, invert mute leds (for broadcast use)
- DHCP

2.08 (2014-09-12)
improvements:
- Xedit bug fixed when changing fx type
- xlr out routing added to routing snippet
- p16 and aes/ebu routing added to out patch snippet
- jitter when syncing to adat/word clock/madi reduced
- sporadic noise when switching between special combinations of fx types removed
- sporadic click at end of usb playback removed
- sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad 1) fixed
- sporadic loss of meter information (osc clients) fixed; osc server version 2.05
new features:
- support for DN32-MADI, DN32-DANTE, DN32-ADAT
- support for DL15X and DL25X stage box series
- iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)

2.07 (2014-06-26)
improvements:
new features:
- support for DL16
- M32 support

2.06 (2014-06-16)
improvements:
- cue delete fixed
- dante card playback gain fixed
- 'use rta source' for geq fixed

2.05 (2014-05-27)
improvements:
- fixed incorrect power-on channel mute state when assigned to mute groups
- fixed issues with right fader bank when in geq on faders or remote mode
- fixed dyn key meter on M/C channel
- osc server updates to support fast sync mode w/ X32Edit
- tap function improved
new features:

2.04 (2014-04-23)
improvements:
- minor graphics and parameter name fixes
new features:

2.03 (2014-04-11)
improvements:
- acceleration for user assignable rotaries on assign home page
- screen flicker and delay fixed when loading cues/scenes/snippets
- scene management improvements and fixes
- remote encoders on assign home page now correctly send out midi messages
- osc server enhancements for X32edit 2.x
new features:
- mix control on compressors (parallel compression option)

2.02 (2014-03-11)
improvements:
- aux/fxrtn sends to subgroup fixed
- output routing tap selector fixed
- dry switch on dimensional chorus
- to end all these discussions: hold sends on fader button (> 1s) to stop blinking
- stereo delay mono feed diagram corrected
- preamp remote control issue with linked channels fixed
- X32CORE scene recall and show import fixed
- snippets fixed (problem with 1st data line)
- usb recorder assign key 'PREV' fixed
- GO button led fixed
new features:
- assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY simultaneously
- midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
- midi snippet recall ([C1 xx])
- midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx] 384..499)
- cue and snippet recall on assignable buttons (including name display on small lcds and assign home screen)
- M/C can be used as effect send bus (FX 1..4)
- V1.x scene/show/library conversion

2.01 (2014-01-23)
improvements:
- dual enhancer fixed
- file version check (show/libs)

2.00 (2014-01-22)
improvements:
- new eq encoder assignment (main lcd)
- channel icon/name visible on fx inserts (dual mono only)
- console init bus send 1-8 default now post eq instead of pre fader
- faders disabled when locked and remote controlled
- comp threshold range reduced to -60..0 dBFS
- sends on fader button flashing
- relaxed sends on fader function (automatically deactivated only by pressing DCA button)
- improved indication of sends on fader signal flow on small displays
- stagebox lock moved to setup/preamp page
- increased parameter resolution on rackamp
- increased sensitivity on deesser
- gain reduction meter on precision limiter
new features:
- eq on fx return channels
- expander mode (1:2, 1:3, 1:4) in gate section
- 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
- user assign rotaries available on assign home page (for producer/compact)
- console lock on HOME button (2.5s), doubles as safe shutdown
- individual eq band reset (w/ undo)
- dca level meters (max post fader level of assigned channels)
- additional pre gate tap for bus sends
- additional post gate tap for outputs
- output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
- smart handling of send levels when changing bus mode
- gate / comp key signal level indication
- additional lcd color modes (inverted display)
- xlr outputs added to routing matrix (e.g. foh passthru)
- sends on fader for mono/center bus and matrices (bidirectional)
- fader extend mode (input channels on bus faders); press two bank select buttons simultaneously (Producer and Compact only)
- gain split mode for foh/mon; ha gains can only be set on setup/preamp page, channels have trim only
- gain remote option; allows console gains to be remote controlled by another console (e.g. use X32RACK as stagebox)
- when pushing the effects button or selecting a channel while on any fx page, the corresponding fx and layer is
automatically selected when used as insert on selected channel or as send effect on selected bus
- jump to page user function optionally includes fx layer
- midi control of channel level, mute, and pan
- freeze function on vintage room
- lots of new effects
- new scene management (cues/scenes/snippets)
- faster boot time and smaller update file size

X32 Firmware Update
Version 2.16 (19 February 2016)
The X32 Firmware Update V 2.16 features performance enhancements to the award-winning X32 operating system. The Version 2.16 rmware improves the main display UI refresh and xes some smaller glitches.
BEHRINGER is constantly adding new features and making enhancements to this extremely stable operating system, so that you always experience the best possible performance from your X32. Check out behringer.com for updates regularly.
Note: It is recommended that you backup all data (export Show and Libraries to USB) before updating, as a rmware upgrade may erase data currently stored on your X32. Please be aware that rmware 2.16 should be used with X32-Edit 2.5 on PC / Mac / Linux computers in wired networks, and with X32-Mix 2.2 or higher on Apple iPads (min. iOS 7) for wireless networking.
Enhancements:

* GUI drawing routines signi cantly accelerated
* Fixed DIN midi remote control problem
* Channel group assignments synced when fader link option is reselected
* EQ gain center led only lights up when gain is exactly 0 dB
* Indication of hard mute state, shown on meter pages with a dark red fader knob
* EQ band reset bug xed
* Ducker attack and release times xed (were swapped since 2.10)
* Routing page tab “p16 out ” renamed to “ultranet ”, see below
DwayneA
Posts: 55
Joined: Thu Apr 15, 2021 11:00 pm

Re: M32 Firmware version log

Post by DwayneA »

Thanks all.
This helps me determine if a step from 4.04.1 to 4.06 is value to our group.
D
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: M32 Firmware version log

Post by GaryH »

I found them FWIW...

X32 Historical 1.01-4.06

1.01-1.15
1.15 (2013-07-09)
New Features: • TRS Aux Input signals can now be transmitted via Card Out, AES50A Out and AES50B Out directly, without the need for assigning them to the DSP processing blocks first. The additional option is "AuxIn 1-6 / TB" carrying the physical auxiliary input signals 1-6 and the talkback signals A and B. • Aux Input Routing improved > The Aux Inputs signals can now be selected in blocks of 2, 4 or 6 Inputs, choosing from these options:
fw 1.14 fw 1.15 AUX IN 1-4 AUX INPUTS LOCAL IN 1-4 LOCAL IN 1-2 AES50A 1-4 LOCAL IN 1-4 AES50B 1-4 LOCAL IN 1-6 CARD 1-4 AES50A 1-2 AES50A 1-4 AES50A 1-6 AES50B 1-2 AES50B 1-4 AES50B 1-6 CARD 1-2 CARD 1-4 CARD 1-6
Note: The (remaining) Aux Input channels will be fed from the physical Aux Inputs 1-6 if not specified otherwise.
Improvements: • X32 RACK now can directly access channel name/icon editing by holding the SELECT encoder down, while pressing the Utility button. • X32 CORE can be initialized by holding the SELECT encoder depressed while switching on • New 'Safe Shutdown' function for X32 CORE, by holding the USB button depressed while in SETUP menu • New console server routines improving USB Recorder performance • Server improved for X32-Edit 1.2 MCU remote control functions • 'Select follows Solo' function only selects a channel when solo is activated, not when deactivated • channel icon and name now copied when activating a channel link
1.14 (2013-06-12) New Features: • Channel Fader Auto Select option – allows selecting channels by simply touching the channel fader • New User Assignable Control Features: - fader of the selected channel can be controlled by a user-assignable encoder - tape (USB recorder) control can be assigned to user-assignable buttons • New X-USB expansion card for 32 x32 channel I/O via USB 2.0 supported
Improvements: • Large indication of selected channel number on main LCD when no channel icon is set • EQ section lo-cut/hi-cut LEDs now also indicate crossover filter types • Headamp settings are copied when linking channels (with global link preference 'Delay+HA' on) • S16 stage box gains can be pre-set, even when no stage box is connected (setup/preamps page) • Extended range for digital trim now +/-18 dB

1.13 (2013-02-18) Improvements: • New OSC server functions (osc-server V0.90) • Mackie Control Universal support improved (i.e. for Cakewalk SONAR) • New user assignable controls for faders, dca and mutegroups • Insert-'source' text for fx 1..4 indicating where the effect is inserted • Corrected scene parameter safes for Preamp and Delay • Improved redraw function for scene load • Corrected indication of channel send fader position on home screen • Firmware required for XControl remote control software version 1.01 and later

1.12 (2013-01-17) Improvements: • Encoder acceleration improved • Channel AFL Solo now always post insert • Sends On Fader related freeze fixed
New Features: • Full support for all new X32 models
1.10 (2012-11-29) Improvements: • Bus AFL solo now always post insert • Talkback gain reduced (previous default setting was too high) • Handling of fader move events while switching fader assignment fixed • Sporadic noise when changing insert position removed • User assignable buttons now correctly return to previous banks when used for sends on faders
New Features: • Direct control of all mic preamps independent from their channel assignment to allow inline recording mode and live card inserts: - route local or AES50 inputs to card, - route card returns to console input channels - set preamp gain (2.5 dB steps) on new preamp setup page, - adjust digital trim +/-12 dB on console 'tape return' channels • 2 new Dual-band DeEsser Effects (dual-mono, stereo) with M/S processing option (can be used as insert or side-chain processes) • The user assignable buttons can now be (re-)assigned to JUMP function regardless of previous function (by holding one of the SET buttons) • Matrix buses have some new features that enable them to be used in simple speaker processing applications: - phase inverter switchable in config/preamp section - signal tap (pre/post EQ, pre/post fader) from bus sends to matrix can be selected now - EQ bands LOW and HIGH now can be switched to crossover filter types (butterworth, bessel, linkwitzriley up to 24dB/oct). Note: The crossover filter types use up the intermediate bands LOW2 and HIGH2 respectively when activated.
New features with GEQ-On-Fader function (reset all, jump in blocks of 8) • On request for theatre productions-the scene parameter safes for mute and fader/pan in input and bus channels, can now be set independently • The meter screens for input channels, mix buses and aux/FX now show the channel's mute status
Notes: • Due to additional scenes parameters (matrix bus options: signal tap, x-over filter in EQ and phase reverse) all scenes that use matrix buses should be checked, because previously created scenes do not contain these additional parameters yet. In order to make old scenes consistent with Firmware 1.10 it is recommended to initialize the console, then load and immediately save back each scene.
1.09 (2012-09-27) Improvements: • When 'safe main level' and 'M/C depends on Main L/R' are activated, M/C level is no longer set to -8 on powerup • User defined buttons now correctly return to previous page when used as channel select • 'Pre' leds now correctly work when auxes or fx returns are selected • Player now plays non-canonical wave files with no artifacts at the end • Recorder automatically restarts with new file when size limit (2GB) is exceeded • DCA solo now also includes channels that are not routed to main L/R (e.g. to group buses) • Erratic behaviour of ch 1 input delay and Matrix 6 insert fixedv
New Features: • Current settings (i.e. single scene) can now directly be saved (to the usb drive) • FX utilities include algorithm (FX type) selection • OSC server updated to 0.7 (to support XiControl update) • Signal flow diagrams dynamically updated when changing dyn/insert position

1.08 (2012-08-31) Improvements: • Ambience FX redraw issue fixed • USB Player/Recorder no longer drops last block • Freeze when using channel library after assigning ‘- Param 64 -’ to any assignable controller fixed • Pre/Post indication on channel home screen updated
New Features: • Sends On Fader on a specific channel or bus can be assigned to user assignable buttons within the ASSIGN section • Scenes can be assigned to user assignable buttons in the ASSIGN section • Holding down a select button and pressing UTILITY now directly accesses the naming screen • Solo option ‘Dim PFL’ allows to apply DIM to PFL sources (to align levels when using as monitor console)

1.07 (2012-08-22) Improvements: • Sporadic freeze when using presets/scenes with long names (> 15 characters) fixed

1.06 (2012-08-21) Improvements: • Freeze when using library FX load with confirmation disabled fixed • Thump noise when using master GEQ and loading tremolo/pan into any other FX slot removed • Main bus afl solo fixed • Non-ASCII characters in filenames (on USB thumb drive) are now ignored so that these files can be selected for play (though it is recommended to use ascii characters only) • After song has been played (in single mode), player returns to stop mode • High EQ in tube stage FX fixed • Dyn key source parameter now correctly disabled on matrix and main channels
1.05 (2012-08-06) Improvements: • Channel link fixed when used with remote control
New Features: • DAW remote control level meter support
1.04 (2012-07-30) Improvements: • Pre/Post send indication on home page fixed (PRE was indicated with the wrong icon) • Send section update issues fixed on home page when using eth remote control • Channel sends not fully updated when changing send type from/to GROUP • Initialize console now sets pans on AUX7/8 to hard left/right • OSC server crashed when path not found – fixed
New Features: • Undo button also available on Scenes/Home screen • Hold UTILITY button to initialize console during boot • OSC server updated to 0.60 (to support pc remote release)

1.03 (2012-07-11) Improvements: • Rotary effect bug fixed • Media full now correctly recognized during file write
New Features: • User section now supports midi events • User section now supports DAW remote control functions • MIDI over aes50 for S16 (user section midi and scene midi) • Selected channel and fader clip LEDs indicate (analog) input clip even with negative trim values
1.02 (2012-06-19) Improvements: • Unit now correctly syncs on AES50 port B @ 44K1 on startup • Correct enumeration of remote controllable preamps (i.e. S16 port B) • Sporadic sync problem (AES50 slave clock phase) on startup fixed • Scan rate of small lcds changed to avoid flickering
New Features: • New lock screen • Console init sets gate threshold to -80dBFS and range to 60dB now

1.01 (2012-06-01) Improvements: • Increased compatibility with slow starting thumb drives

2.0-2.16

2.16 (2016-02-02)
improvements:
- fixed DIN midi remote control problem introduced in 2.15
2.15 (2015-11-06)
improvements:
- channel group assignments synced when fader link option is reselected
- eq gain center led only lights up when gain is exactly 0 dB
- hard mute state shown on meter pages (dark red fader knob)
- eq band reset bug fixed
- screen draw routines significantly accelerated
- ducker attack and release times fixed (were swapped since 2.10)
2.14 (2015-07-16)
improvements:
- X-USB and DN32-USB were reporting wrong sample rate after changing sample rate without reboot
2.13 (2015-07-06)
improvements:
- fixed an issue where iQ speaker settings were not recalled correctly when linked
- iQ setup now also accessible via layer buttons
- fixed an issue where inserts were not activated when usb was very busy during startup
- correct preamp indication on DL152..DL155, output SRC disabled on DL155
- fixed an issue where midi messages were duplicated when assigned to more than one assignable
button/encoder simultaneously
2.12 (2015-06-01)
improvements:
- HUI level meters and LCD fixed
- DHCP menu on X32CORE fixed
- fixed rare issue where aes50 slave mode won't sync
- iQ speaker settings moved to /outputs/p16 path
new features:
- iQ speaker link function
2.11 (2015-04-09)
improvements:
- load show file in X32CORE fixed (snippet offset)
- fader motor issues on M32/M32R (minimum position) fixed
- exclude hidden and system files from usb file list
- correct indication of 0 dB fader position
- scene GO and UNDO leds fixed
- DHCP can be selected on X32CORE
- bus AFL solo correctly uses pan when bus is routed to LR
new features:
- support for M32C, S32, DL32, DL231
2.10 (2014-11-20)
improvements:
- screen flicker when switching between pages with overlay graphics removed
- improved clock stability in Dante slave mode
new features:
- rta detector selection (rms/peak), peak hold, and adjustable decay time
- gate section: expander with adjustable range
- compressor section: compressor/expander with auto mode
2.09 (2014-10-23)
improvements:
- fixed issue where usb drives were not recognized when connected during power-on
- setup/global and setup/config screens rearranged
- sample rate can now be changed without reboot
- issue with mute menu on scenes/home screen fixed
- some redraw issues related to mute menu fixed
new features:
- safe shutdown (incl. usb recorder shutdown), console reboot, firmware update, factory reset added to setup
- selectable 12h (am/pm) and 24h clock mode
- new options: hard mute groups, dcas as mute groups, invert mute leds (for broadcast use)
- DHCP
2.08 (2014-09-12)
improvements:
- Xedit bug fixed when changing fx type
- xlr out routing added to routing snippet
- p16 and aes/ebu routing added to out patch snippet
- jitter when syncing to adat/word clock/madi reduced
- sporadic noise when switching between special combinations of fx types removed
- sporadic click at end of usb playback removed
- sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad 1) fixed
- sporadic loss of meter information (osc clients) fixed; osc server version 2.05
new features:
- support for DN32-MADI, DN32-DANTE, DN32-ADAT
- support for DL15X and DL25X stage box series
- iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)
2.07 (2014-06-26)
improvements:
new features:
- support for DL16
- M32 support
2.06 (2014-06-16)
improvements:
- cue delete fixed
- dante card playback gain fixed
- 'use rta source' for geq fixed
2.05 (2014-05-27)
improvements:
- fixed incorrect power-on channel mute state when assigned to mute groups
- fixed issues with right fader bank when in geq on faders or remote mode
- fixed dyn key meter on M/C channel
- osc server updates to support fast sync mode w/ X32Edit
- tap function improved
new features:
2.04 (2014-04-23)
improvements:
- minor graphics and parameter name fixes
new features:
2.03 (2014-04-11)
improvements:
- acceleration for user assignable rotaries on assign home page
- screen flicker and delay fixed when loading cues/scenes/snippets
- scene management improvements and fixes
- remote encoders on assign home page now correctly send out midi messages
- osc server enhancements for X32edit 2.x
new features:
- mix control on compressors (parallel compression option)
2.02 (2014-03-11)
improvements:
- aux/fxrtn sends to subgroup fixed
- output routing tap selector fixed
- dry switch on dimensional chorus
- to end all these discussions: hold sends on fader button (> 1s) to stop blinking
- stereo delay mono feed diagram corrected
- preamp remote control issue with linked channels fixed
- X32CORE scene recall and show import fixed
- snippets fixed (problem with 1st data line)
- usb recorder assign key 'PREV' fixed
- GO button led fixed
new features:
- assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY simultaneously
- midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
- midi snippet recall ([C1 xx])
- midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx] 384..499)
- cue and snippet recall on assignable buttons (including name display on small lcds and assign home screen)
- M/C can be used as effect send bus (FX 1..4)
- V1.x scene/show/library conversion
2.01 (2014-01-23)
improvements:
- dual enhancer fixed
- file version check (show/libs)
2.00 (2014-01-22)
improvements:
- new eq encoder assignment (main lcd)
- channel icon/name visible on fx inserts (dual mono only)
- console init bus send 1-8 default now post eq instead of pre fader
- faders disabled when locked and remote controlled
- comp threshold range reduced to -60..0 dBFS
- sends on fader button flashing
- relaxed sends on fader function (automatically deactivated only by pressing DCA button)
- improved indication of sends on fader signal flow on small displays
- stagebox lock moved to setup/preamp page
- increased parameter resolution on rackamp
- increased sensitivity on deesser
- gain reduction meter on precision limiter
new features:
- eq on fx return channels
- expander mode (1:2, 1:3, 1:4) in gate section
- 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
- user assign rotaries available on assign home page (for producer/compact)
- console lock on HOME button (2.5s), doubles as safe shutdown
- individual eq band reset (w/ undo)
- dca level meters (max post fader level of assigned channels)
- additional pre gate tap for bus sends
- additional post gate tap for outputs
- output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
- smart handling of send levels when changing bus mode
- gate / comp key signal level indication
- additional lcd color modes (inverted display)
- xlr outputs added to routing matrix (e.g. foh passthru)
- sends on fader for mono/center bus and matrices (bidirectional)
- fader extend mode (input channels on bus faders); press two bank select buttons simultaneously (Producer and Compact only)
- gain split mode for foh/mon; ha gains can only be set on setup/preamp page, channels have trim only
- gain remote option; allows console gains to be remote controlled by another console (e.g. use X32RACK as stagebox)
- when pushing the effects button or selecting a channel while on any fx page, the corresponding fx and layer is
automatically selected when used as insert on selected channel or as send effect on selected bus
- jump to page user function optionally includes fx layer
- midi control of channel level, mute, and pan
- freeze function on vintage room
- lots of new effects
- new scene management (cues/scenes/snippets)
- faster boot time and smaller update file size
3.0-3.12
3.12 (2019-04-08):
improvements:
M32/M32R fader/scribble update after scene recall fixed
3.11 (2019-03-22):
improvements:
- DN32-WSG and DN32-LIVE temporary support over OSC fixed

3.10 (2019-02-08):
improvements:
- xtouch: pressing REC starts 2-channel usb recorder correctly
- xtouch: send to linked bus pan can now be reset by pressing pan encoder
- headamp remote startup bugfix
- X series fader firmware update enabled again
new features:
- channel color/name broadcast via aes50
- support for DN32-WSG

3.09 (2018-02-07):
improvements:
- fixed auto mute when using very specific eq settings

3.08 (2017-11-09):
improvements:
- Midas IO boxes (DL15x, DL25x) now correctly detected when multiple remote clients are connected
- fader accuracy in send on fader mode improved
- performance of automix function improved (with very low input signals)
- ADAT and MADI card sync light flicker fixed
- support for X-WSG and X-LIVE implemented
- fader board firmware update disabled (replaced by standalone updater)
3.07 (2016-09-30):
improvements:
- x-touch channel color and name update problem corrected
- x-touch assigning mute groups fixed
- labels on snippet page corrected (console scope)
- fader tolerance issue with some M series consoles fixed
3.04 (2016-08-24):
improvements:
- PREV cue button function fixed
- gate and dyn module gain graphs always show active gain curve (in grey when module is not active)
- automix gain reduction meter scaling corrected
3.00 (2016-08-04):
improvements:
- indication of available outputs on routing page corrected for models with 8 outs
- fixed issue with send mutes when dca bank was selected in sends on fader mode
- compatibility with new editor version
- rearranged screen encoders on sends page for consistency
- show/snippet name redraw issue fixed
- monitor metering point changed (to indicate output clipping)
- channel name/icon no longer copied (odd->even) when link is activated
- -action/clearsolo now also deactivates key solo
new features:
- 8 channel (1..8) automixing with two groups
- phase invert on outputs, aux, aes/ebu, P16
- xover filter types on main and mono/center
- x-touch remote control (MIDI/Ethernet)
4.02 (2020-01-21):
New features:
- Welcome-Screen on first power up after an update (Select the Firmware header on Setup-Global page to display again)
- CustomBootScene.scn can be loaded automatically at bootup and created in the Setup-Global page (also on X32Core/M32C)
- CustomLock.bmp and CustomBoot.bmp support (see examples on www.behringer.com)
- Routing-Input: cycle through the connected AES devices using the Up/Down arrows
- X32Core/M32C: Console backup export and load
Improvements:
- M32/R : faderboard firmwares reviewed for better behaviour on both slow and fast speeds
- showing insert/source details on effects screen
- improved conversion of input clocks to user slots (Routing-User In-Utility-6th button)
- pressing Select and Utility opens the Name/Icon screen
- Xlive locator can be moved using the transport encoders
- showing a dialog when trying to use the USB recorder when no USB drive is inserted
- updating the TopLeft selected channel box when a popup is shown on screen
- added header line to the console.bak file
- X32Core/M32C: Error screen when an export fails
Bug fixes:
- Channel
- preventing copied channel window to redraw when copying remotely
- Config: changed INHP label to IN/LC
- EQ: fixed crossover band type name display and coloured frames redraw
- X-Live-Card:
- redrawing utility header on session selection
- changed the scrub function icon
- disabling transport buttons when Mute Groups are open
- better SD info redraw when popups are shown
- Routing-Input: redrawing connected AES devices when they change
- fixed snippet FX4R selection
- fixed channel source display when Aux1 is set to AES50 33
- fixed recorder text display on the top of the screen
- fixed gain control offset-issue from X-Touch using User-Input
- user assign section shows SD session/markers properly
- reset User-Blocks when loading scene created with former parameter set

--------------------------------------------------------------------------------
4.01 (2019-12-06):
New features:
- fast faders option on M32/M32R
- dual FX engines copy A->B and B->A
- added additionnal FW integrity check after update (prevents soft bricking)
- convert Input banks to user slots (in Routing-Input-Utility 6th encoder)
- Show control buttons assignable to User assigns (NEXT, PREV, UNDO, and GO)
Bug fixes:
- Card
- fixed Card In/Out pops and cracks
- Xlive:
- fixed freezing when stopping recording
- correcting setting display on 1st screen
- cant delete empty session anymore
- confusing SD card status display fixed
- Dante: preventing white noise when clock frequencies are mismatched
- Routing
- HA remote availability when forwarding connected HA (for ex, in Stagebox -> MonitorMixer -> FOH configuration)
- corrected source display when AuxIn assigned to Local In
- corrected routing screen names (for user assign-jump to page / osc screen polling)
- input patch overview header changed
- Effects
- fixed LC curve/sends faders redrawing on FX screens
- fixed utility FX rack jumping around when selecting actual FX engine
- Library
- importing files (presets/show/...) made prior to 2.1 works again
- preset number 100 was shown as 10
- Xtouch display corrected (DCA scribstrips update, user slot source display)
- inverted "wedge L/R" icon to match scrible strip
- Snippet-Utility better redraw
- corrected gain reduction scales (chan Gate/Dyn, meters)
- TB destination Bus 10 was showing "Bus1"
Improvements:
- Channel
- confirmation dialog when pasting/loading HA config with +48V activated
- improved Bus-Config send configuration list
- Card
- Xlive session name shown again
- Dante help text now mentions "Enable Sync to external" setting
- Setup
- better Name suggestion / Icon scrolling interaction
- updating Name/Icon screen on remote changes
- factory reset sets TB to external
- Routing
- Output destination and tap are not set at the same time anymore
- Library
- FX library tables reviewed
- added default monitor presets to factory reset
- Monitor
- changed oscillator destination order to previous one
- Keyboard
- keyboard wraps fully (not just line to line)
- new folder name can now have numbers, dash and underscore (no other symbol allowed)
- reduced flickering on symbols page
- reseting Name/Note button on scene save
- OSC protocol
- "-action/setposition 0" is possible

--------------------------------------------------------------------------------
4.00 (2019-11-13):
new features:
- point to point user routing, 4 input and 6 output banks (32 in / 48 out)
- DP48/HUB4 remote configuration support
- DP48 setup page with preset library
- send pan optionally follows LR pan function
- full backup export/restore function
- new keyboard with channel name suggestions/history and keyboard layouts
- X32Core/M32C: Export Show function
- M32/M32R: V.1 Fader option (forces update of faderboards, requires reboot)
- option for coloured RTA bars
improvements:
- new GUI design
- updated channel icons
- coloured fader tracks
- error/warning popups can be closed using encoders
- popup option to perform backup before firmware update
- Channel
- Config: Low Cut filter curve preview
- Config/Sends: Dynamic signal flow display
- EQ: hiding unsettable parameters
- Utility: copied channel overview
- Meters
- channel color indicators
- Routing
- tabs re-organized and grouped by function
- output patch overview tables with shortcut to assign output
- next button also scolls destination list
- iQ setup: improved lists behaviour
- Library
- scrolling using LOAD encoder offers suitable presets only
- Effects
- warning message when creating feedback loop (only when using hardware encoders)
- Utility: FX rack re-organized by effect category
- Utility: copied effect preview
- going from effect to library selects active FX slot
- Setup
- Config: more default bus configurations (all pre/all post)
- Name/Icon: more channel name suggestions
- Monitor
- Talkback: destination preview
- Lamp setting moved to new tab in Monitor screens (when available)
- Scenes
- Cues: cue number 500.9.9 is possible now
- Snippets/Safes: select header to select all elements in column
- Mute Groups
- buttons made more visible on screen

4.04 (2020-11-18)
New features:
- DCA-Spill
- Press SELECT on DCA to see associated channels (flashing SELECT on DCA)
- Hold SELECT on DCA to change DCA assignment (flashing SELECT on channels)
- Press DCA layer button to toggle between DCA-Spill pages
- Change left fader layer or hold DCA layer button to disable DCA Spill
(Active DCA-Spill is indicated by flashing DCA layer button)
Improvements:
- Improved interoperability with X-Touch
- Gain/Trim issue on CH 1-8
- Issue with send pan indication when using sendPanFollowsLR
- Improved Copy/Pasting of dynamic settings for MTX/ST/M
Bug fixes:
- Prevent freeze when using Snippet-Utility
- Fixed send pan LED-Ring indication when using sendPanFollowsLR
- Hide folder names with non ASCII characters
--------------------------------------------------------------------------------
4.03 (2020-10-06):
New features:
- variable scrolling speed for spectrograph
- Library AES50
- DP48 remote support for stereo link & talkback messages
- improved transmission of DP48 messages through stageboxes and hubs

Improvements:
- Channel
- bring pan back to center when unlinking (if +-100)
- X-Live-Card:
- show warning when SD card is close to maximum capacity (10min / 1min remaining)
- showing protected SD card state
- better backup progress bar
- showing naming prompt when exporting a scene to USB
- better support when importing a CustomBootState as a scene
- CustomBootState can now be auto-loaded without a confirm dialog (append _NoPopUp to the filename)
- hold and scroll on snippets/safes
- added name prompt when exporting to USB


Bug fixes:
- HA gain control not updating digital trim when using User-Banks
- Fixed long Session-Name display
- Fixed show import/export popup text redrawing
- checking User-Blocks param safe and scene safe when loading an old scene
 
 
4.06 (2021-03-09)
Improvements:
- Matrix, M/C, and LR channels can be assigned to DCA and mute groups
- Snippets can now contain the Stereo Bus LR switch parameter
- Parameter Safe for control surface state
- DCA Spill doesn't move unused faders
Bug Fixes:
- Fixed DCA Spill color and mute group assign issues
 
 
Post Reply

Return to “M/X32 Consoles”