Flow8
-
- Posts: 122
- Joined: Thu Apr 15, 2021 9:52 am
- Location: Bedford, UK
Re: Flow8
Hi @Wrp , welcome to this forum. There are a few things that could cause silent headphones:
Are you using headphones with a four-pole TRRS plug? If so you will need a splitter cable to separate the mic and phones connections to two three-pole TRS plugs (example in following post) in addition to the 3.5mm/6.35mm adapter.
Check, in the app, that Solo is not selected for any of the channels.
On the Flow8, open Menu -> Output -> Phones and select Main Post. Raise the channel and Main faders so that the meters peak at around -18dB to -12dB. Raise the Phones control to about -12dB (as shown on the smal LCD screen).
If it still doesn't work, try different headpnones and/or adapters.
Are you using headphones with a four-pole TRRS plug? If so you will need a splitter cable to separate the mic and phones connections to two three-pole TRS plugs (example in following post) in addition to the 3.5mm/6.35mm adapter.
Check, in the app, that Solo is not selected for any of the channels.
On the Flow8, open Menu -> Output -> Phones and select Main Post. Raise the channel and Main faders so that the meters peak at around -18dB to -12dB. Raise the Phones control to about -12dB (as shown on the smal LCD screen).
If it still doesn't work, try different headpnones and/or adapters.
Last edited by RexBeckett on Sun Jun 20, 2021 11:18 am, edited 3 times in total.
-
- Posts: 122
- Joined: Thu Apr 15, 2021 9:52 am
- Location: Bedford, UK
Re: Flow8
Example TRRS/2xTRS splitter cable:
Re: Flow8
Hi @Wrp , sorry to hear that the Flow8 section didn't allow you to post there - not sure why at the moment, but will look into it. In the meantime, I will move this thread to the Flow8 section shortly for you.
Paul Vannatto
Global Moderator
Global Moderator