Updated editor v4.3 for the x/m32 released

Roblof
Posts: 28
Joined: Wed Apr 14, 2021 9:23 pm

Updated editor v4.3 for the x/m32 released

Post by Roblof »

A new version of m/x32-edit is available on Behringer and Midas website (version 4.3) with a lot of new features.

Version 4.3 - release

- Fix for Library AES50 crash when odd/even outs assigned to L/M or R/M
- Matrix, M/C, and LR channels can be assigned to DCA and mute groups
- Snippets can now contain the Stereo Bus LR switch parameter
- Parameter Safe for control surface state
- Removed RTP-Midi from Setup-Page
- Preventing sleep on MAC (no App Nap)
- Improved touch interface for all platforms
- New preferences for Time and Data Mixer Sync 'OnConnect'
- New preferences for 'Auto Connect' and 'Auto Sync'
- 'Sync Direction' is saved as preference
- Command line interface on startup with options:
-n, --name <mixername> connect to mixer with given name
-i, --ipaddress <x.x.x.x> connect to mixer with given ip address
-x, --sync_mixer2pc connect and synchronize from mixer to pc
-p, --sync_pc2mixer connect and synchronize from pc to mixer

-c, --console <sceneindex> connect and load console scene with index 0...99
-s, --scene <sceneindex> connect and load edit(pc) scene with index 0...99
-f, --file <scenefile> connect and load external scene file

-d, --default start app with default size
-l, --full start app on full screen

-t, --standard set standard size
-m, --medium set medium size
-g, --high set high size
-u, --ultra set ultra size
-z, --size <factor> set size to factor between 0.5 and 3.0
-h, --help print help and exit
RexBeckett
Posts: 122
Joined: Thu Apr 15, 2021 9:52 am
Location: Bedford, UK

Re: Updated editor v4.3 for the x/m32 released

Post by RexBeckett »

Quite a lot of options that have been requested by users over the years. Thanks for the heads-up, Robert.
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: Updated editor v4.3 for the x/m32 released

Post by GaryH »

Very cool! Thanks @Roblof Things are flying in every direction for our MG products! Exciting times.
Klaus
Posts: 68
Joined: Sat Jul 17, 2021 6:23 am

Re: Updated editor v4.3 for the x/m32 released

Post by Klaus »

X32-Edit v4.3 on OSX Yosemite 10.10.5...
is eating a lot cpu here... more than 75%...
On the same Macmini3,1 with OSX 10.9.5 it is very fast, about 35%
that's what I work with normally...
I'm all ears for hints...
I optimised prefs already...
Would need Yosemite for another app...
Thanks

Klaus
Image

Image
Klaus
Posts: 68
Joined: Sat Jul 17, 2021 6:23 am

Re: Updated editor v4.3 for the x/m32 released

Post by Klaus »

Maybe I have found something...
:
Ethernet control of the X32-Edit app was via
3 routers - connected on the backside / LAN ports (10 / 100 )
in series...and could cause network slow down,

Not ?

This is just on my home rig, where I set things up offline...

I found out yesterday when testing on a live rig that has only 1 router 10 / 100
and the X32-Edit app was a lot easier on cpu...

But still the question stays,
:
Why not such a big cpu hit when running in OSX 10.9.5 ?

Maybe I should upgrade my wlan routers to
10/100/1000 Lan port devices

?

> 1GB network Dante capable...will be my next step.

Best

Klaus
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: Updated editor v4.3 for the x/m32 released

Post by GaryH »

@Klaus Is this part of a Dante network? Involving the X32 with X-Dante? If so you can eliminate the router and have a direct path for X32-Edit. At least Dante and X32 Edit won't need a router. I'm not using a Mac at the moment but X32-Edit is blistering fast used that way. I may miss the usage scenario. Gigabit Dante ready switches would be sweet but I'm guessing not entirely neccessary.
Klaus
Posts: 68
Joined: Sat Jul 17, 2021 6:23 am

Re: Updated editor v4.3 for the x/m32 released

Post by Klaus »

No, no Dante in this scenario...

I tried X-Dante on another - the same - rig,
and thought I had to use Dante controller to register connections from the secondary X-Dante plug to the Mac...
So from a Dante source ( A&H iLive IDR48 ) to X-Dante to X32Core ( card inputs / outputs )
you say I don't need a connection from secondary X-Dante plug to the Mac ?

Klaus
User avatar
GaryH
Posts: 943
Joined: Wed Apr 14, 2021 8:19 pm

Re: Updated editor v4.3 for the x/m32 released

Post by GaryH »

@Klaus No you don't need. Primary X-Dante cable to your switch, short cable from secondary X-Dante port to X32 mixer network (remote) port. Allows direct connection to X32-Edit.
Klaus
Posts: 68
Joined: Sat Jul 17, 2021 6:23 am

Re: Updated editor v4.3 for the x/m32 released

Post by Klaus »

Errata :
Seems I was taking the screenshot from different layers -
X32-Edit seems to use more or less cpu depending on what is going on re: graphics, meters etc...
Prefs for meters are already set 50%...
Here are screenshots taken correctly,
still a difference in cpu between Mavericks and Yosemite....
Macmin3,1

Best

Klaus

Image

Image
Klaus
Posts: 68
Joined: Sat Jul 17, 2021 6:23 am

Re: Updated editor v4.3 for the x/m32 released

Post by Klaus »

GaryH wrote: Tue Feb 21, 2023 1:23 pm @Klaus No you don't need. Primary X-Dante cable to your switch, short cable from secondary X-Dante port to X32 mixer network (remote) port. Allows direct connection to X32-Edit.
Thats what I meant
My X32-network is on 10/100 LAN ports on a DLINK router,
if I use Dante VSC on this Mac with above router, it will throttle down my Dante primary - line
correct ?
So I should go directly without router LAN ports ?
Thanks

Klaus
Post Reply

Return to “X32 Edit”