Behringer Ultracoustic AT108 Guitar Amplifier

Feel free to talk about any non MT related equipment here.
Post Reply
Indiana
Posts: 3
Joined: Wed Jun 09, 2021 11:25 am

Behringer Ultracoustic AT108 Guitar Amplifier

Post by Indiana »

Hi,

I have a Behringer Ultracoustic AT108 Guitar Amplifier and want to also use it to receive a Bluetooth signal from my mobile phone/laptop.
Basically, make it into a Bluetooth speaker...

I bought a 3.5 aux Bluetooth receiver, before realizing (Had a senior moment!) that the 3.5 jack was too small.

Is there an adaptor on the market I can buy to make this fit?

There are 3 inputs on the Behringer (Instrument Input - CD Input - Head Phones), into which would I plug the Bluetooth adaptor, to make it work?
If it works at all? (Has anyone tried?)

Thanks,
Indy
User avatar
pvannatto
Posts: 154
Joined: Wed Apr 14, 2021 3:48 pm
Location: Ontario, Canada

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by pvannatto »

Hi Indiana,

Sorry, but I'm not understanding what you want converted. You say that you have a 3.5 aux and want to convert it to a 3.5 jack. Aren't they the same size?
Paul Vannatto
Volunteer Moderator
Indiana
Posts: 3
Joined: Wed Jun 09, 2021 11:25 am

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by Indiana »

Hi Paul,

Sorry, I'm probably not using the correct terminology.

If you look at the accompanying photo you will see what I have bought (It's a 3.5mm Bluetooth audio adaptor)

The problem I have is it's not wide enough to fit into one of the 3 Behringer inputs (Instrument Input - CD Input - Head Phones)

I need to buy some kind of 'adaptor' to connect to the end, which would then make it fit into one of the 3 Behringer inputs.

Hope that makes sense.
Image
Last edited by Indiana on Wed Jun 09, 2021 6:12 pm, edited 1 time in total.
Indiana
Posts: 3
Joined: Wed Jun 09, 2021 11:25 am

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by Indiana »

I think I have found what I need, a 6.35mm Male to 3.5mm Female Jack Converter Plug.

I could still do with someone telling me which input I need to plug it into (Instrument Input - CD Input - Head Phones) to make the amplifier into a Bluetooth speaker to receive and listen to music off my mobile or laptop?
User avatar
pvannatto
Posts: 154
Joined: Wed Apr 14, 2021 3:48 pm
Location: Ontario, Canada

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by pvannatto »

Hey Indiana, yes that is what you need - 6.35mm Male to 3.5mm Female adapter, similar to this. These frequently come with headphones, etc. (I have a small bag of them).
Paul Vannatto
Volunteer Moderator
User avatar
MJKlein
Site Admin
Posts: 318
Joined: Wed Apr 14, 2021 12:08 pm
Location: Hukou, Taiwan
Contact:

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by MJKlein »

Indiana wrote: Wed Jun 09, 2021 6:31 pm I could still do with someone telling me which input I need to plug it into (Instrument Input - CD Input - Head Phones) to make the amplifier into a Bluetooth speaker to receive and listen to music off my mobile or laptop
The headphone jack is an output, isn't it? Try the CD input. If you don't like how that sounds, try the instrument input.
湖口鄉新竹縣台灣 Hukou Township, Hsinchu County, Taiwan
Behringer X32/Dante + Soundcraft Ghost + X32ReaperAutoMate
English/中文
This site is hosted at Dathorn: https://dathorn.com/index.php?r=489
Every possible way to contact me: https://MySlink.app/mjklein
Indiana
Posts: 3
Joined: Wed Jun 09, 2021 11:25 am

Re: Behringer Ultracoustic AT108 Guitar Amplifier

Post by Indiana »

Makes sense, thanks
Post Reply

Return to “General Equipment Discussion Forum”