Insert to external out always engaged

M32 and X32 Digital Consoles
Post Reply
Op3r
Posts: 12
Joined: Sun Mar 10, 2024 5:49 pm

Insert to external out always engaged

Post by Op3r »

Hi everyone! I’m trying to route channels or bus through insert point to an external out for using an Elektron Octatrack as looper.
The problem comes when I choose the proper aux out (yet configured in routing tab as insert) in the config channel page the sound goes to aux out but is ALWAYS engaged. It doesn’t stop sending by pushing the orange button on or off!
I don’t know if I have explained in the right way but I need to engage or disengage , when needed, the insert of the channels I have to loop with Octatrack, and obviously in that case the dry sound has to be muted.
I could use any bus or matrix but, in that case, I need also on the fly mute the main LR bus… too many operation. I hope using insert
Any suggestion?
User avatar
pvannatto
Posts: 1603
Joined: Wed Apr 14, 2021 3:48 pm
Location: Ontario, Canada

Re: Insert to external out always engaged

Post by pvannatto »

Op3r wrote: Wed Oct 30, 2024 2:24 pm the sound goes to aux out but is ALWAYS engaged. It doesn’t stop sending by pushing the orange button on or off!
The (orange) Insert button only disables the return (from the external FX), not the send. You could change the tap of the Insert (on Routing, Aux Out screen) to one of the +Mute taps, then mute the channel or bus that is feeding that insert.
Paul Vannatto
Global Moderator
Post Reply

Return to “M/X32 Consoles”