Hi All-
Complete newb here. I'd like to route a 1000 hz test tone to all 16 xlr outputs to test my toe deck. I've been studying for 2 hours and I can't figure it out.
If it's possible, please let me know the route.
THANKS AND HAPPY THANKSGIVING!
Need X32 Routing Gurus
Re: Need X32 Routing Gurus
Hi @dorkjackson , on the Routing, Out 1-16 screen assign the following:
* Output 1 -> Mixbus 1 (post fader)
* Output 2 -> Mixbus 2
... (etc.)
* Output 15 -> Mixbus 15
* Output 16 -> Mixbus 16
Then on Routing, XLR Out screen assign the following
* Output 1-4 -> Out 1-4
* Output 5-8 -> Out 5-8
* Output 9-12 -> Out 9-12
* Output 13-16 -> Out 13-16
Bring up all mixbus master faders to 0 db
On the Monitor, Oscillator screen
* Select Sine as type
* Set Freq 1 or 2 to 1K00 and enable it
* Assign all buses as outputs
* Output 1 -> Mixbus 1 (post fader)
* Output 2 -> Mixbus 2
... (etc.)
* Output 15 -> Mixbus 15
* Output 16 -> Mixbus 16
Then on Routing, XLR Out screen assign the following
* Output 1-4 -> Out 1-4
* Output 5-8 -> Out 5-8
* Output 9-12 -> Out 9-12
* Output 13-16 -> Out 13-16
Bring up all mixbus master faders to 0 db
On the Monitor, Oscillator screen
* Select Sine as type
* Set Freq 1 or 2 to 1K00 and enable it
* Assign all buses as outputs
Paul Vannatto
Global Moderator
Global Moderator