Multi Transport Shuttle dial

[DaveT]

Any way to increase the speed of the shuttle dial, so that it jumps in mutes or tens of seconds instead of the hi res its at just now. To shuttle forwards or back say 5 minutes of time takes forever spinning that dial. Would be nice to implement the cursors to say 5x, 10x, 20x shuttle speed. ive got almost 2 hours of a recording on the SD cards that I didnt have time to marker as I recorded and mixed last night, so shuttling through song by song to find the starts and add markers is a real pain in the backside spinning that dial like an idiot to go forward even three or four minutes per song

[pmaillot]

I did request for such feature with no success so far. The only other way I found is to go to the screen and finger-drag the cursor from there.

[DaveT]

yip , I tried key combinations etc with no joy. thanks for the reply

[pmaillot]

I know there's already acceleration taken into account in turning the jog wheel (data can be between 0, 1 to 32 it seems), but if 32 is the max (at least that's what I could get by turning the wheel fast) and the speed scale is linear, I think it should follow an exponential scale and max should be 3000!
W-> play.$pos data = 19.00
W-> play.$pos data = 0.00
W-> play.$pos data = 25.00
W-> play.$pos data = 0.00
W-> play.$pos data = 29.00
W-> play.$pos data = 0.00
W-> play.$pos data = 22.00
W-> play.$pos data = 0.00
W-> play.$pos data = 30.00
W-> play.$pos data = 0.00
W-> play.$pos data = 25.00
W-> play.$pos data = 0.00
W-> play.$pos data = 27.00
W-> play.$pos data = 0.00
W-> play.$pos data = 32.00
W-> play.$pos data = 0.00
W-> play.$pos data = 24.00
W-> play.$pos data = 0.00
W-> play.$pos data = 14.00
W-> play.$pos data = 0.00
W-> play.$pos data = 7.00
W-> play.$pos data = 0.00
W-> play.$pos data = 3.00
W-> play.$pos data = 0.00
W-> play.$pos data = 2.00
W-> play.$pos data = 0.00
W-> play.$pos data = 1.00
W-> play.$pos data = 0.00
W-> play.$pos data = 1.00
W-> play.$pos data = 0.00