Behringer FCB1010 MIDI Foot Controller PEDAL Unit UNO chip question

[Horace Batchelor]

Do the latest (current) versions of the Behringer FCB1010 MIDI Foot Controller PEDAL Unit still retain the problem shown below ,whereby you have to hit the switch twice in order to operate the stompbox in Amplitube but the LED is not highlighted in the GUI.
The work around for this is to replace the behringer chip for the one available below
(UnO stands for "UnOfficial" (= not created by Behringer). UnO firmware solves some annoying bugs and adds some frequently requested features. To name just one: in "stompbox mode" you can use 1 row of FCB1010 switches to switch effects on/off, with the LEDs showing the current state at all time. Initial stompbox states can be programmed for each preset. )

https://www.fcb1010.eu/