Updated editor v4.3 for the x/m32 released
Re: Updated editor v4.3 for the x/m32 released
@Klaus Do you mean a switch or a router? I may be getting confused. Why would you need multiple router ports. I guess I don’t know how you are set up.
Re: Updated editor v4.3 for the x/m32 released
Sorry ...
Each workstation - be it home, live, studio etc has it's WLAN router...for now
10 / 100 specified...and the computers are connected on the LAN side, as are devices that connect thru network,
i.e. X32 etc.
If I 'interconnect' these workstations, I 'just' connect them by cable between their LAN ports...
so if I set up X32 scenes or work with X32Core @home, I connect thru 'maybe' several routers on the LAN ports,
thus no direct connection from the computer running X32-Edit > to the X32Core
But as I start now with adding X-Dante cards, these routers ^may^not be sufficient for low Dante latencies...
Hope to be clear
Thanks for help
and best regards
Klaus
Each workstation - be it home, live, studio etc has it's WLAN router...for now
10 / 100 specified...and the computers are connected on the LAN side, as are devices that connect thru network,
i.e. X32 etc.
If I 'interconnect' these workstations, I 'just' connect them by cable between their LAN ports...
so if I set up X32 scenes or work with X32Core @home, I connect thru 'maybe' several routers on the LAN ports,
thus no direct connection from the computer running X32-Edit > to the X32Core
But as I start now with adding X-Dante cards, these routers ^may^not be sufficient for low Dante latencies...
Hope to be clear
Thanks for help
and best regards
Klaus