Hi team,
Following the excellent knowledge here on this forum I am working to setup my DP48s. I created a names.csv and saved it to an appropriately formatted SD card (same i used to update firmware on the units).
It all works well except the first group name is missing. I used Textedit and excel on a mac, and checked in the terminal for any funny business.
Setup:
M32C (4.06) -> {AES} -> HUB4 -> {AES} -> DP48 (2.2)
Reset DP48. Load names from SD card. All load except first group. I tried a capital 'V' and a lowercase 'v'
Any advice appreciated!!
DP48 Missing First Group Name on Import?
-
- Posts: 10
- Joined: Sat Aug 05, 2023 4:17 pm
Re: DP48 Missing First Group Name on Import?
Self-reporting - this seems to have sorted itself out. Honestly not sure what the issue was. Hopefully my other issue goes the same way!
Re: DP48 Missing First Group Name on Import?
Make sure that the text line (first and only line) in names.csv file is as follows
group1,group2,group3,group4,group5,group6,group7,group8,group8,group10,group11,group12
comma delimited, no quotes, max length of each group name is 8
group1,group2,group3,group4,group5,group6,group7,group8,group8,group10,group11,group12
comma delimited, no quotes, max length of each group name is 8
Paul Vannatto
Global Moderator
Global Moderator