Hi.
Does any one of you know how the correct routing shold be done on a XR32 with two S16 and then be able to use the DP48
Today our XR is connected to AES50A - S16(1) AES50 A, out AES50B and into the AES50A on the last S16.
The routing between XR32 and the S16's are working just fine, but when I connect the DP48, i have trouble understanding the logic. Seems to me that i have filled up all 48 channels and still missing some. I suspect that the AES50A-B on the first S16 have something to do with it.
-On the AES50-A routing page i have: Outputs 1-8 (Out 1-8) Outputs 9-16 (Out 9-16) Outputs 17-24 (Out 1-8) Outputs 25-32 (Out 9-16)
And the AES50-B is the same.
My keys are at input 17-20 but i find them at 42-45 on the DP48.
Any one of you know what to do?
I also have a P16, and this works great.
Behringer XR32 with two S16 and Midas DP48
Re: Behringer XR32 with two S16 and Midas DP48
Assuming you're trying to run the DP48 from the B socket of the console.
The signals from the S16 preamps arrive on the console's A socket. The Routing>AES50B tab defines signals going from the console to the DP48. If you want signals from the S16 preamps to go the DP48, you need to set Outputs 1-32 on the Routing>AES50B tab to AES50A 1-32. That will send signals arriving on the A socket (the S16s' preamps) out of the console's B socket, so they arrive on whatever is connected to the console's B socket: the DP48.
The signals from the S16 preamps arrive on the console's A socket. The Routing>AES50B tab defines signals going from the console to the DP48. If you want signals from the S16 preamps to go the DP48, you need to set Outputs 1-32 on the Routing>AES50B tab to AES50A 1-32. That will send signals arriving on the A socket (the S16s' preamps) out of the console's B socket, so they arrive on whatever is connected to the console's B socket: the DP48.
Re: Behringer XR32 with two S16 and Midas DP48
Hi.craigf wrote: ↑Mon Apr 01, 2024 6:56 am Assuming you're trying to run the DP48 from the B socket of the console.
The signals from the S16 preamps arrive on the console's A socket. The Routing>AES50B tab defines signals going from the console to the DP48. If you want signals from the S16 preamps to go the DP48, you need to set Outputs 1-32 on the Routing>AES50B tab to AES50A 1-32. That will send signals arriving on the A socket (the S16s' preamps) out of the console's B socket, so they arrive on whatever is connected to the console's B socket: the DP48.
Thank you for your answer.
I forgot to mention that i am using the B socket
The B page on the routing looks like this.
I guess that the AES50-A is a bit longer up than the screenshot shows.
I might be better of using a computer rather than an iPad when looking at this.
So no mather what i do on the B-routing, it would not do anything with our current setup?
Edit:
Something like this?
Last edited by knudar on Mon Apr 01, 2024 10:35 am, edited 1 time in total.
Re: Behringer XR32 with two S16 and Midas DP48
Yes, the first screenshot taken from the ipad won't get you what you need to the DP48. The second one will.