Ultranet feed from a turbosound floor monitor?

[greiswig]

I'm going to be doing a gig at a venue where the house sound runs an M32 into Turbosound floor wedges via ultranet. Can I put an ethernet cable into one of the Thru ports on one of the wedges and get my mix feed for a P16-M from there? I'm sure it will be whatever the house routing is, but if I can get a scribble strip from them...

[GaryH]

@greiswig Pretty sure the answer is yes. as long as the speaker has a p16 thru port. Whatever they use as p16 ch's will show up on the p16m

[pvannatto]

As @GaryH mentioned, the answer is yes. But you will need to use the P16M power adapter, since there will not be any POE in this setup.