EQ settings reset

[AlanC76]

Hi all,

I'm using my Flow 8 with an iPad mini, perfect for setting things up and, as a solo act, can go into the hall and listen / modify settings.
Recently, I've had a strange problem, probably due to not understanding something (as usual )
I've connected a microphone h/f receiver to channel 3 and want to adjust EQ . When I open the EQ page and set it the way I want, it resets to standard values when I close the page. Driving me crazy ! ! Have I overlooked something ?

Thanks for any help

[therentabrain]

I haven't experienced this.

Some general advice ...
Reinstall the app
Try the app on another (borrowed) phone and see if it has the same behavior
Try resetting as many settings as possible and see if it persists
Try toggling the various EQ modes in Settings and see if that is enough to wake it up and make it work
Make sure you aren't missing something dumb like an "OK/Save" button that you aren't pressing, or something on the physical mixer like a stuck button.
Make sure you are using the default original power supply and it's plugged in well
Disconnect USB connection, Bluetooth audio, etc to simplify things temporarily and see if it helps.

[AlanC76]

Many thanks.
I've just tested again this evening and after reinstalling the app all is working normally again !