X32 Only Allowing 16 Channels with MPC Key 61

[AlexBryer]

So I have my x32 connected USB 2.0 to my MPC Key 61 via the X-Live card. I have then both set to 32 in/32 out. I have tried so many routing combinations but no matter what, the MPC only receives x32 input from Local 1-16 and can only send audio out to Card 1-16. 17-32 provides no signal either way.

I'm trying to set the Local 1-8 to be XLR ins that route to the MPC inputs 1-8 as Audio tracks 1-8 then have those MPC outputs be routed to the x32 Card 9-16 inputs for playback. This works fine. Then send my MPC drum outs to x32 Card 17-26 inputs, Keys stereo to x32 Card 27-28, then bass, strings, and synth to x32 Card 29, 30, and 31. This does not not work.

I can flip everything and have the music working on 1-16, but then the Audio out from x32 17-32 won't go into the MPC for some reason.

Right now, I have to route everything 1-16 both ways and jump between them by assigning x32 17-32 inputs to receive Card 1-16, but now I have recorded Audio playback tracks on 9-16 as well since I can't access 17-32.

Essentially, how can I access the x32s 17-32 channels on the MPC.

Any insight on this would be extremely appreciated.

[pvannatto]

the MPC only receives x32 input from Local 1-16 and can only send audio out to Card 1-16. 17-32 provides no signal either way.

Welcome to our forum.

For the signals from the X32 to the MPC, what is assigned on the Routing, Card screen for Outputs 17-24 and 25-32?

For the signals from the MPC to X32, what is assigned on the Routing, Inputs screen for Inputs 17-24 and 25-32 in Playback mode?