New DP48 Firmware 2.2

[GaryH]

Midas DP48 Firmware Update
Version 2.2 - (15 April 2021)
Welcome
Congratulations on purchasing this innovative personal monitoring system. This update is introducing security mechanisms to prevent interference with the Talkback if daisychaining multiple devices and reducing noises and pops when reinitializing AES50 connection.
Midas is constantly adding new features and making enhancements to this extremely stable ecosystem of digital mixers, I/O boxes and personal monitoring mixers. This means you always experience the best possible performance. Download and install the latest firmware for DP48 and HUB4 to make use of the latest features and improvements.
Bugfixes
• Fix for Talkback causing issues with daisy chained devices
• Security mechanism to reduce noises and pops when reconnecting AES50
Firmware Update Process
1. Download the update file from midasconsoles.com and extract the archive
2. Copy the dp48m_xx.upd file onto an SD card, into the following path inside SD-root \DP48M
3. Make sure the DP48 is turned off
4. Insert the SD card into the SD card slot on the rear panel of your DP48
5. Hold the SETUP button while turning the DP48 on
6. Wait until the update procedure is completed and the DP48 has booted again
7. Do not turn off the device and do not remove the SD card before the update has finished
8. The device will boot automatically and briefly indicate the new firmware version
Note: SD Card must be FAT or FAT32 formatted for use in DP48
Visit midasconsoles.com and check for updates of your products regularly.