Update firmware S32

[Jsun_Tyler]

I went through the instructions on updating the firmware but I am not sure how to validate that it has been updated? S32 is connected to M32c via AES

[Jsun_Tyler]

bump

[pvannatto]

@Jsun_Tyler, I don't think there is a way to validate the firmware version for the S32. It does not show in the X32 Setup screen and there is no screen on the S32. The only update (according to the ReleaseNotes) is "Forwarding of DP48 Messages via AES50". So if you connect a DP48 to it and go to the Assign screen, and you see the channel names and colors, the firmware is up to date.

[Jsun_Tyler]

@Jsun_Tyler, I don't think there is a way to validate the firmware version for the S32. It does not show in the X32 Setup screen and there is no screen on the S32. The only update (according to the ReleaseNotes) is "Forwarding of DP48 Messages via AES50". So if you connect a DP48 to it and go to the Assign screen, and you see the channel names and colors, the firmware is up to date.

I assumed as much but there really should be if we are required to upgrade the firmware

[pvannatto]

there really should be if we are required to upgrade the firmware

The problem is that the DL32 (and S32) is a "dumb" stagebox, in that there is no display and no way of configuring it, unlike the DL16 or S16.