Search found 993 matches
- Fri May 10, 2024 2:07 pm
- Forum: Stageboxes
- Topic: Sd16 as a monitor splitter
- Replies: 7
- Views: 183
Re: Sd16 as a monitor splitter
Drumfreak I think you misunderstood what I said. You only have 16 total analog outs TO foh, not 24, foh will be short 8 of your inputs. Your monitors using P16’s would still be ok. Another SD16 would work if added in, but you would still need a 24 ch analog snake to FOH. Plus a lot of XLR to connec...
- Fri May 10, 2024 9:19 am
- Forum: WING Consoles
- Topic: Wing and patchpannel ?
- Replies: 5
- Views: 168
Re: Wing and patchpannel ?
Optimist I did not read this entire thread....BUT regarding Dante, you can still find Cisco managed switches with both SFP module slots and POE for very reasonable prices (under $100 used). Having a few switches with SFP slots will allow VERY long distances using fiber optic in between them. I have...
- Fri May 10, 2024 8:14 am
- Forum: Dante Audio Networking
- Topic: Installing a Dante card to the Wing internal slot.
- Replies: 313
- Views: 58280
Re: Installing a Dante card to the Wing internal slot.
Optimist I am not sure about that post number BUT It could still be a Brooklyn III if one year old, Probably not BUT. You need to know which if updating. If you already installed it and are not sure, Dante Controller, updater section, should be able to tell you what firmware is installed so you can...
- Thu May 09, 2024 8:08 pm
- Forum: Stageboxes
- Topic: Sd16 as a monitor splitter
- Replies: 7
- Views: 183
Re: Sd16 as a monitor splitter
To f/u what I think Kevin was hinting at-If you can get by with 16 analog outputs to FOH mixer via an analog connection (a snake of some sort) I would say yes as you only have 16 total XLR outputs to utilize between the Rack and SD16. If you need more than 16 ch's to send to FOH I would say no. If P...
- Wed May 08, 2024 12:05 pm
- Forum: Dante Audio Networking
- Topic: Installing a Dante card to the Wing internal slot.
- Replies: 313
- Views: 58280
Re: Installing a Dante card to the Wing internal slot.
@MJKlein Sorry. Maybe in the next year it will be exactly as straightforward as you mentioned. I won’t hold my breath however.
- Wed May 08, 2024 11:28 am
- Forum: M/X32 Consoles
- Topic: User Out - what's it for
- Replies: 5
- Views: 139
Re: User Out - what's it for
DwayneA The attached pic would be totally impossible without a User out bank (not to say that example IS useful) I think the most useful way to explain it is it removes the need for a bank of 8 of a particular category. So a bunch of unneeded ch's get wasted in your routing. https://i.postimg.cc/F1...
- Wed May 08, 2024 10:01 am
- Forum: Dante Audio Networking
- Topic: Installing a Dante card to the Wing internal slot.
- Replies: 313
- Views: 58280
Re: Installing a Dante card to the Wing internal slot.
MJKlein That would be (and should be) essentially correct. There SHOULD be at least 2 current firmware files for each type. An Internal and an external version for BK2 and BK3 clearly labeled-so yes 4. IF up to date and clearly named that should be all that is needed. That is however where all real...
- Tue May 07, 2024 3:30 pm
- Forum: Dante Audio Networking
- Topic: Installing a Dante card to the Wing internal slot.
- Replies: 313
- Views: 58280
Re: Installing a Dante card to the Wing internal slot.
AnthoFR Welcome to this forum. You NEED to know if you have a Brooklyn II or Brooklyn III card, It says on the little Dante Card itself which type it is. The firmware is specific by card type. Brooklyn 2 still uses the version listed on the Behringer website (not 4.2.7.7), either internal or extern...
- Tue May 07, 2024 3:14 pm
- Forum: M/X32 Consoles
- Topic: Behringer X32 + SD16, no connection over 150’ cable?
- Replies: 48
- Views: 2105
Re: Behringer X32 + SD16, no connection over 150’ cable?
pvannatto Thank you! I don't think you have to get too crazy with the split BUT the name for the #2 might take some doing. That said, if you have the energy to split it in more than 2 pieces, great! No worries if not. I appreciate the trying regardless. Dan Mortensen We all happily went off the rai...
- Mon May 06, 2024 10:21 am
- Forum: M/X32 Consoles
- Topic: Behringer X32 + SD16, no connection over 150’ cable?
- Replies: 48
- Views: 2105
Re: Behringer X32 + SD16, no connection over 150’ cable?
MJKlein pvannatto Is it possible to separate this thread into 2 sections? IMO it would be well worth it because there is so much useful info in it BUT most of it unfortunately not really related to the OP title. It looks to me like the first 8 posts in it are related to the original question (last ...